Hanging Up The Telephone; Adjusting The Volume When Receiving A Call; Redial Function; Call Switching Operation - Alpine INA-W910 Owner's Manual

Hanging up the Telephone

Touch [ ].
The call finishes.
Adjusting the volume when receiving a
Call
While calling, you can adjust the volume. The adjusted volume level is
stored.
Press / on the unit to adjust the volume.
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result
in feedback. If feedback is noticed as feedback is directly related to
the volume, turn down the volume as low as acceptable to eliminate
it. Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.

Redial Function

You can redial the person you have previously called.
After finishing a call, touch [
5 seconds.
The telephone is redialed.

Call Switching Operation

While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
While calling, touch [ ] to switch the call sound
between the unit and mobile phone.
• Depending on the mobile phone, this operation may not be
performed.
86
-EN
] on the screen within

Call History

Call History is recorded for the last dialed/received/missed calls. There
are various ways of making calls based on the "Call History". The
following steps 1 to 3 are common to the various ways of making these
calls. For details, refer to each individual category for making calls.
1
Press and hold MUTE/PHONE for at least 2
seconds.
The Telephone Menu screen is displayed.
2
Touch [ ] of the desired item to place the call.
Setting items:
Dialed Calls / Received Calls / Missed Calls / Phone Book /
Voice Dial / Dial Input
• The unit will update the information in the Call History
automatically each time a mobile phone is connected or receiving/
dialing a call. At this time, if you select any outgoing mode, "Now
Updating" will be displayed.
• It may take some time for the list to be displayed, and also directly
after connection, the list may not be brought up to date.
3
Touch [ ] to return to the previous screen.
Touch [ Exit ] to return to the main source screen that was
displayed before the setup operation was started.
• If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.

Redialing a Number in Dialed Calls History

Previously dialed telephone numbers are stored in dialed calls history.
You can redial a number by searching from dialed calls history.
Setting item: Dialed Calls
Touch [Call] of the person name or the telephone
number you want to call from the Dialed Calls list.
The call is placed.