Changing The Display; Receiving A Multicast; Rbds Operation; Recalling The Rbds Tuner Mode - Alpine INA-W910 Owner's Manual

Changing the Display

Text information, such as Station name, Song title, Artist, etc. is
displayed while receiving a digital radio station.
1
Touch [INFO.] on the HD Radio Tuner mode main
*
screen.
Each time you touch this button, the display changes as shown
below.
2
Short Station Name *
3
Song title *
3
Artist name *
3
Album name *
1
* This button is unavailable when a RBDS radio station is received due
to no HD Radio signal.
2
* Displays Short Station Name / Long Station Name in the Station
Information Service Data.
3
* Displays Song title / Artist / Album in the main program Service
Data.

Receiving a Multicast

Multicasting is the ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of eight multicast station channels can be selected
on this unit.
When a radio station multicast is received, the "Multicast" indicator
lights.
1
Touch [ ] in the HD Radio Tuner mode.
The program list is displayed.
2
Touch [ ] of the desired program type.
The selected program is received.
3
Touch [ ] or [ ] of on the function guide.
The sub channel of the received radio station is changed.
40
-EN

RBDS Operation

Display example for RBDS main screen
2
Long Station Name *
3
Song title *
3
Artist name *
3
Album name *
1
*
2
*
The RBDS (Radio Broadcast Data System) is a radio information
system. The RBDS allows you to receive a variety of information such
as traffic information, station names.
The RBDS digital data includes the following:
PS
PTY

Recalling the RBDS Tuner mode

1
2
• If there is no HD Radio signals in the current area, after 10 seconds,
3
4
[Tag] button: Stores the tag information. For details, refer
to "Storing the tag information of RBDS stations" on
page 41.
1
[DX SEEK]* button: Displays the tuning mode selection
list.
2
[PTY SEARCH]* button: Start searching for a station of
the selected program type. For details, refer to "PTY
(Program Type) Tuning" on page 41.
[ANALOG] button: Touch the highlighted button to
cancel the Compulsory Analog Radio mode.
Displays the preset number/frequency.
The button displays the current tuning mode.
Displays only when the PTY tuning mode is selected.
Program Service Name
Program Type
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
Touch [HD Radio].
The digital radio mode is activated and the display changes
to the HD Radio Tuner Mode screen.
the unit will change to the RBDS Tuner mode automatically.
Touch [P1/3] to change the function guide.
Touch [ANALOG].
"Analog only" is displayed.
The Compulsory Analog Radio mode is activated. The
display changes to the RBDS Tuner mode screen and the
[ANALOG] button will be highlighted.