Guide Adjustment; Vise And Stop - Grizzly G1011Z Instruction Manual

Guide Adjustment

Vise and Stop

The blade will cut best when the blade is support-
ed as close to the workpiece as possible. Once
the material has been secured in the vise, loosen
the two knobs on top of the saw bow and slide the
moveable guide over as close to the material as
possible without interfering with the cut. Tighten
the knobs. See Figure 15.
Figure 15. Moveable blade guide.
Fixed Jaw
Movable
Jaw
Material Stop
Figure 16. Vise components.
G1011 7" x 12'' Bandsaw -19-