Closure - Grizzly G1011Z Instruction Manual

SECTION 7: CLOSURE
The following pages contain general machine
data, parts diagrams/lists, troubleshooting guide
and Warranty/Return information for your Model
G1011Z Metal-Cutting Bandsaw.
If you need parts or help in assembling your
machine, or if you need operational informa-
tion, we encourage you to call our Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in Section
3 General Information The specifications, draw-
ings, and photographs illustrated in this man-
ual represent the Model G1011Z as supplied
when the manual was prepared. However, due
to Grizzly's policy of continuous improvement,
changes may be made at any time with no obli-
gation on the part of Grizzly. Whenever possible,
though, we send manual updates to all owners of
a particular tool or machine. Should you receive
one, add the new information to this manual and
keep it for reference.
We have included some important safety mea-
sures that are essential to this machine's opera-
tion. While most safety measures are generally
universal, Grizzly reminds you that each work-
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
Operating this equipment has the potential
for flying debris to cause eye injury. Always
wear safety glasses or goggles when operat-
ing equipment. Everyday glasses or reading
glasses only have impact resistant lenses,
they are not safety glasses. Be certain the
safety glasses you wear meet the appro-
priate standards of the American National
Standards Institute (ANSI).
-22-
We recommend you keep a copy of our cur-
rent catalog for complete information regard-
ing Grizzly's warranty and return policy. If you
need additional technical information relating
to this machine, or if you need general assis-
tance or replacement parts, please contact the
Service Department listed in Section 3: General
Information.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
The Model G1011Z was specifically designed
for metal-cutting operations. DO NOT MODIFY
AND/OR USE THIS MACHINE FOR ANY
OTHER PURPOSE. Modifications or improp-
er use of this tool will void the warranty. If you
are confused about any aspect of this machine,
DO NOT use it until you have answered all
your questions. Serious personal injury may
occur.
Like all power tools, there is danger associ-
ated with the Model G1011Z Metal-Cutting
Bandsaw. Accidents are frequently caused
by lack of familiarity or failure to pay atten-
tion. Use this tool with respect and caution
to lessen the possibility of operator injury.
If normal safety precautions are overlooked
or ignored, serious personal injury may
occur.
G1011 7" x 12'' Bandsaw