Clean Up; Site Considerations - Grizzly G0668 Owner's Manual

degreaser

Clean Up

The unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner
or degreaser shown in Figure 4. For thorough
cleaning, some parts must be removed. For opti-
mum performance from your machine, clean
all moving parts or sliding contact surfaces.
Avoid chlorine-based solvents, such as acetone
or brake parts cleaner that may damage painted
surfaces. Always follow the manufacturer's instruc-
tions when using any type of cleaning product.
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery.
NOT use these products
to clean the machinery.
Many cleaning solvents
are
Minimize your risk by only
using these products in a
well ventilated area.
G2544—Solvent Cleaner & Degreaser
A great product for removing the waxy shipping
grease from your machine during clean up.
Figure 4. Cleaner/degreaser available from
Grizzly.
-12-
DO
toxic if inhaled.

Site Considerations

Floor Load
Refer to the Machine Data Sheet on Page 3 for
the weight and footprint specifications of your
machine. Some floors may require additional
reinforcement to support both the machine and
operator.
Placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See Figure 5 for the minimum
working clearances.
�� � �
�
�
Figure 5. Minimum working clearances (top
view).
G0668 20" Vertical Metal-Cutting Bandsaw
�� � �
�
�