Recreating Filter Effects - Pentax Q10 Operating Manual

7
Use the four-way controller (23)
to select [Use filters in
combination] or [Save as], and
press the 4 button.
Select [Use filters in combination] when you
want to apply additional filters to the same
image. The screen that was displayed in
Step 3 appears again.
If [Save as] was selected, the filter-processed image is saved as a new image.
Up to 20 filters, including a digital filter used during shooting (p.130), can be
combined to the same image.

Recreating Filter Effects

Retrieves the setting of an image with filter effects and applies the same
filter effects to other images.
1
Select a filter-processed image in Playback mode.
2
Select D (Digital Filter) in the playback mode palette, and
press the 4 button.
3
Use the four-way controller (23)
to select [Recreating filter
effects], and press the 4
button.
The filter effects used for the selected
image appear.
4
To check the parameter details,
press the M button.
You can check the filter parameters.
Press the M button again to return to
the previous screen.
Continue selecting filters? Continue selecting filters?
Use filters in combination Use filters in combination
Save as Save as
Cancel Cancel
MENU
Applying the digital filter Applying the digital filter
Recreating filter effects Recreating filter effects
Searching for the original image Searching for the original image
MENU
Reapplies following digital filter Reapplies following digital filter
effects from previous image effects from previous image
1. 1. 5. 5. 9. 9. 13. 13.
2. 2. 6. 6. 10. 10. 14. 14.
3. 3. 7. 7. 11. 11. 15. 15.
4. 4. 8. 8. 12. 12. 16. 16.- - - -
Details Details
MENU INFO
171
OK OK
OK
7
OK OK
OK
100-0001 100-0001
17. 17. - - - -
18. 18. - - - -
19. 19. - - - -
20. 20. - - - -
OK OK
OK