Table of Contents
Advertisement
128
Muted/Bleach Bypass
Reversal Film
Monochrome
5
Cross Processing
*1 For [Favorite 1-3], you are required to save the settings of a cross processed image
as a favorite in advance through the playback mode palette. (p.129)
6
Use the four-way controller (45) to change the settings.
You can check the saturation and hue with the radar chart.
Available operations
E-dial
d/i button
7
Press the 4 button.
The screen that was displayed in Step 3 appears again.
8
Press the 4 button.
The camera returns to the control panel.
You can also change the settings from the [A Rec. Mode 1] menu.
Image Tone
Switches between [Sharpness] and [Fine Sharpness].
(Not available in C mode.)
Resets the set value.
Parameter
Saturation: -4 to +4
Toning: Off/Green/Yellow/Orange/Red/
Magenta/Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
Filter Effect: None/Green/Yellow/Orange/
Red/Magenta/Blue/Cyan/Infrared Filter
Toning: Off/Green/Yellow/Orange/Red/
Magenta/Purple/Blue/Cyan
High/Low Key Adj: -4 to +4
Contrast: -4 to +4
Sharpness/Fine Sharpness: -4 to +4
Random/Preset 1-3/Favorite 1-3 *1
Advertisement
Table of Contents
