Table of Contents
Advertisement
• Digital Filter is not available in the following situations.
- when the capture mode is set to Z (Night Scene HDR)/p (HDR) of
H (Scene) mode
- when [File Format] is set to [RAW] or [RAW+]
• When Digital Filter is set, Multi-exposure and HDR Capture are not available.
• Depending on the filter used, it may take longer to save images.
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Digital
Filter], and press the 4 button.
The screen to select a filter appears.
The last image taken after the camera was turned on is displayed in the
background.
3
Use the four-way controller
(2345) to select a filter.
You can check the selected filter effect
with the background image.
Proceed to Step 7 if you do not need to
change the parameters.
4
Press the mc button.
The parameter setting screen appears.
5
Use the four-way controller (23)
to select a parameter, and the
four-way controller (45) to
adjust the parameter's value.
6
Press the 4 button.
The screen that was displayed in Step 3 appears again.
Toy Camera
Toy Camera
Parameter Adj.
Parameter Adj.
Cancel
Cancel
MENU
Shading Level
Shading Level
Cancel
Cancel
MENU
131
5
OK
OK
OK
OK
OK
OK
Advertisement
Table of Contents
