Recreating Filter Effects - Pentax Silkypix K-500 Operating Manual

8
Use the four-way controller (23)
to select [Apply additional filter(s)]
or [Save as], and press the 4
button.
Select [Apply additional filter(s)] when
you want to apply additional filters to
the same image. The screen that was
displayed in Step 3 appears again.
If [Save as] is selected, the filter-processed image is saved as a new
image.
Up to 20 filters, including a digital filter used during shooting (p.165), can be
applied to the same image.

Recreating Filter Effects

Retrieves the filter effects of a selected image and applies the same filter
effects to other images.
1
Select a filter-processed image in the single image display.
2
Select D (Digital Filter) in the playback mode palette,
and press the 4 button.
3
Use the four-way controller (23)
to select [Recreating filter effects],
and press the 4 button.
The filter effects used for the selected
image appear.
Continue selecting filters? Continue selecting filters?
Apply additional filter(s) Apply additional filter(s)
Save as Save as
Cancel Cancel
MENU
Applying the digital filter Applying the digital filter
Recreating filter effects Recreating filter effects
Searching for the original image Searching for the original image
MENU
201
OK OK
OK
6
OK OK
OK