Pentax Q10 Operating Manual page 81

3
Press the four-way controller
(3), and use the four-way
controller (45) to select l or
c.
l Exposure
Bracketing
Exposure Bracket
c
+Remote Ctrl
4
Press the four-way controller (3), and turn the e-dial to set
the bracket value.
The bracket value can be set in increments of 1/3 EV or 1/2 EV
depending on the lens being used.
Step Interval
1/3 EV
1/2 EV
Available operations
mc button
e-dial
d/i button Resets the compensation value.
5
Press the 4 button.
The camera is ready to take a picture.
• When [Autofocus Method] (p.85) is set to [AF Select (25 Points)], [Select] or
[Spot], the focus position is locked in the first image and is used for
subsequent images.
• Switch to a mode other than l or c in the Drive Mode setting screen to
cancel Exposure Bracketing. The setting is canceled when the camera is
turned off if [Drive Mode] is set to P (Off) in [Memory] of the [A Rec. Mode
3] menu. (p.189)
• You can combine Exposure Bracketing with the built-in flash or an external
flash (P-TTL auto only) to change only the flash output continuously.
Takes pictures with the shutter release button.
Takes pictures with an optional remote control unit. The
remote control operates according to the Remote Control
shooting (p.96) setting. The shutter is immediately
released when set to i (Remote Continuous Shooting).
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0
±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0
Adjusts the exposure compensation value (when taking only
underexposed or overexposed images).
Exposure Bracketing Exposure Bracketing
MENU Cancel Cancel
Bracket Value
79
OK OK
OK
4