Wells WATER-MAX Owner's Manual page 18

DELIMING INSTRUCTIONS (continued)
CAUTION:
SHOCK HAZARD
DO NOT submerge tank in
water.
TM
Deliming Water-Max
9. Remove tank and lid.
•
Remove tank from Water-Max
•
Remove tank lid from tank. Wash, rinse,
and sanitize tank lid in the 3-compartment
sink. Allow to air dry. Store tank lid for later
use.
10. Clean tank.
•
Using a standard green scrub pad, clean all
scale and lime from the tank and water level
probe.
NOTE: The water level probe is located in
the tank, in the back right corner near the
top.
If tank comes clean, proceed to tank rinsing
below; otherwise see Overnight Tank Cleaning.
11. Rinse and reinstall tank.
•
Rinse tank thoroughly at least twice. Pour all rinse water into a
sink.
•
Reinstall tank lid on tank.
•
Reinstall tank on Water-Max
is fully seated in socket.
•
Press power switch to ON. After a short delay, tank will begin
filling.
16
Continued
TM
.
TM
shelf. Make sure tank connector