Setting Eye-Fi Communication - Pentax X-5 Operating Manual

The items on the pull-down menu vary depending on the selected Video
output format.
To change the display, set the Video output format before setting the
HDMI output format.
The table below shows the combinations of the Video output format and
HDMI output.
Resolution

Setting Eye-Fi Communication

You can automatically transfer images to a computer or similar devices
via wireless LAN using a commercially available Eye-Fi card. For details
on transferring images, refer to "Transferring Images Using an Eye-Fi
Card" (p.194). The default setting is P (Off).
1
Use the four-way controller (23) to select [Eye-Fi] in
the [W Setting] menu.
2
Use the four-way controller (45) to select O or P.
O Communicates using an Eye-Fi card
P Does not communicate using an Eye-Fi card
3
Press the 4 button.
The setting is saved.
To establish Eye-Fi communication, you first have to specify a wireless
LAN access point and transfer destination on the Eye-Fi card. For details
on how to set up the card, refer to the operating manual supplied with the
Eye-Fi card.
Video output format
NTSC
Auto (The largest size that both the AV
device and camera support is automatically
selected)
1080i (1920×1080i)
720p (1280×720p)
480p (1920×1080i)
PAL
576p (720×576p)
6
175