Setting The Eye-Fi Communication - Pentax Optio H90 Orange Operating Manual

5
Press the 4 button.
The setting is saved.
Depending on the country or region, images and sound files may fail to
be played back if the video output format is set differently from the one
in use there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.151
Video output format of each city 1p.235

Setting the Eye-Fi Communication

You can transfer images to your computer and to the website of your
choice automatically via wireless LAN using an Eye-Fi card. Refer to
"Transferring Images Using an Eye-Fi Card" (p.221) for details on how
to transfer images. The default setting is P (Off).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Eye-Fi].
7
3
Use the four-way controller (45)
to select O or P.
O Starts transferring using the Eye-Fi
P
4
Press the 3 button.
The camera returns to A mode or Q mode.
The images will be transferred automatically.
192
card
Does not transfer using the Eye-Fi
card
Setting
Video Out NTSC
Eye-Fi
Brightness Level
5sec.
Power Saving
Auto Power Off 3min.
Reset
Exit
MENU
2/3