Pentax X-5 Operating Manual page 204

Message
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image cannot be
processed
No card in the camera
Available memory on
card is insufficient to
copy the images
Available built-in
memory is insufficient to
copy the images
Cannot process
correctly
Please pop-up the flash Press the b button to enable the use of the flash.
Please confirm the lens
cap is removed
Not enough battery
power remaining to
activate Pixel Mapping
This card isn't
8
compatible with this
camera
The version of this Eye-
Fi card is outdated
202
Displayed when you switch to Q mode while an image is
still being recorded, or when the protect setting or DPOF
setting is being saved. It disappears after the image is
recorded or the setting is saved.
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images.
Displayed for files that cannot be processed.
Displayed when no SD Memory Card is inserted.
Displayed when there is insufficient memory on the SD
Memory Card to perform copying.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Edit processing fails.
Displayed when the power is turned on with the lens cap on.
Turn the camera on after removing the lens cap.
Displayed during pixel mapping if the battery level is
insufficient. Install new batteries or use the optional AC
adapter kit K-AC129 (p.32).
Displayed when the version of the Eye-Fi card is outdated
and the camera is not compatible with it (p.194).
Description