Pentax X-5 Operating Manual page 91

To Set the Focusing Area
You can change the autofocus area (Focusing Area).
J Multiple
Spot
K
Automatic
W
Tracking AF
3
Use the four-way controller (23) to change the
focusing area setting.
4
Press the 4 button.
The setting is saved.
• In N (Frame Composite), C (Movie), c (Time-Lapse Movie) and d
(High Speed Movie) modes, the focusing area cannot be set to W.
• In 9 (Green) and S (Fireworks) modes, the focusing area is fixed at
J.
To Set the Auto Macro
You can set the focus in the macro range when the distance to the
subject is 50 cm or closer.
When the focus mode is set to = or J, the focus is adjusted to the
macro range (distance to the subject: 10 cm to 50 cm) as necessary.
When the focus mode is set to q, the focus is adjusted even within the
standard range, as necessary. When it is set to I, the focus is only
O
adjusted within the 1cm macro range (1 cm to 20 cm). (Default setting)
When the Auto Macro function is activated during shooting, q appears
on the display.
The focus is only adjusted in the respective focus range.
P
3
Use the four-way controller (23) to select [Auto
Macro].
4
Use the four-way controller (45) to select O (On) or
P (Off).
The setting is saved.
The camera sets a focusing area in the center of the display and
focuses on the nearest subject in the focusing area.
The camera sets a narrow focusing area, making easier for you
to focus on a specific subject.
The camera continues to focus on the moving subject while you
are pressing the shutter release button halfway.
3
89