Pentax X-5 Operating Manual page 162

3
Use the four-way controller (23)
to select [Single Image].
4
Press the 4 button.
The message [Applies DPOF settings to this image] appears.
5
Use the four-way controller (45) to select an image.
If DPOF settings have already been made for the selected image, the
previous number of copies and date setting O (On) or P (Off) is
displayed.
6
Use the four-way controller (23)
to choose the number of copies.
5
7
Press the Green button to switch
O or P for [Date] setting.
O
P
To continue DPOF settings to other
image(s), repeat Steps 5 to 7.
8
Press the 4 button.
The settings are saved and the screen shown in Step 3 reappears.
Depending on the printer or printing equipment at the photo processing
lab, the date may not be imprinted on the pictures even if O is selected
for [Date] in DPOF setting.
To cancel DPOF settings, set the number of copies to [00] in Step 6 and
press the 4 button.
160
Imprints the date.
Does not imprint the date.
Single Image
All Images All Images All Images
Cancel Cancel Cancel
100 - 0017 100 - 0017
100
Applies DPOF settings Applies DPOF settings
to this image to this image
0 0
Copies
Date
Date Date
Cancel Cancel
MENU
100 - 0017 100 - 0017
100
Applies DPOF settings Applies DPOF settings
to this image to this image
0 1
Copies
Date
Date Date
Cancel Cancel
MENU
OK OK OK OK
0017
OK OK
OK
0017
OK OK
OK