Denon AVR-E300 Owner's Manual page 91

Tone
Adjust the tonal quality of the sound.
Setting items
Tone Control On : Allow tone adjustment (bass, treble).
Off : Playback without tone adjustment.
Set the tone control function
to "On" and "Off".
"Tone Control" can be set when "Dynamic EQ" (vpage 90) is set
to "Off".
NOTE
• The tone cannot be adjusted in the "DIRECT" mode.
• The default setting differs depending on the sound mode.
Bass –6dB – +6dB
Adjust bass.
• "Bass" can be set when the menu "Tone Control" setting is "On".
• The default setting differs depending on the sound mode.
Treble –6dB – +6dB
Adjust treble.
• "Treble" can be set when the menu "Tone Control" setting is "On".
• The default setting differs depending on the sound mode.
DVD
Default settings are underlined.
Setting details
Restorer
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The "Restorer"
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also restores the original bass characteristics for a rich and
expanded tonal range.
Setting items
Mode High : Optimized mode for compressed sources with very weak highs (64
Set the mode for kbps and under).
"Restorer". Medium : Apply suitable bass and treble boost for all compressed sources
(96 kbps and under).
Low : Optimized mode for compressed sources with normal highs (96
kbps and over).
Off : Do not use "Restorer".
• This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
• "Restorer" settings are stored for each input source.
• This item default setting for "NETWORK" and "iPod/USB" is "Low". All
others are set to "Off".
• This cannot be set when the sound mode is set to "DIRECT".
Audio Delay
While viewing video, manually adjust the time to delay audio output so that the video and audio are
synchronized.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" (vpage 92) is set to
"On" and when a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
88
Setting details
Default settings are underlined.
Setting details
Audio