Denon AVR-E300 Owner's Manual page 102

Manual Setup
Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup.
• If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select
Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® (vpage 89, 90).
• "Manual Setup" can be used without changing the settings. Please set if necessary.
Setting items
Speaker Config. Front : Set the front speaker size.
Indicate speaker presence • Large : Use a large speaker that can adequately play back very low bass
and select speaker size frequencies.
categories based on bass • Small : Use a small speaker that has inadequate playback capacity for
reproduction capability. very low bass frequencies. Note that for most multi-channel speakers,
this is the best choice.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center" and "Surround" can not be
"Large" or "Small" speaker.
set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossovers"
• Large : Use a large speaker that can adequately play back very low bass
(vpage 100) as the
frequencies.
standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
very low bass frequencies. Note that this is almost always the best
choice.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back very low bass
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
very low bass frequencies. Note that this is almost always the best
choice.
• None : Select when the surround speakers are not connected.
DVD
Default settings are underlined.
Setting details
Setting items
Distances Unit : Set the unit of distance.
• Feet / Meters
Set distance from listening
position to speakers.
Step : Set the minimum variable width of the distance.
Measure beforehand the
• 1ft / 0.1ft
distance from the listening
• 0.1m / 0.01m
position to each speaker.
Set Defaults : The "Distances" settings are returned to the default
settings.
• Reset : Reset to the defaults.
• Cancel : Do not reset to the defaults.
When you select "Set Defaults" and press
ENTER
settings to the factory defaults?" prompt is
displayed. Select either "Reset" or "Cancel",
and press
Front L / Front R / Center / Subwoofer / Surround L / Surround R :
Select speaker for distance setting.
• 0.0ft – 60.0ft / 0.00m – 18.00m : Set the distance.
• The speakers that can be selected differ depending on the "Speaker
Config." (vpage 99) settings.
• Default settings :
Front L / Front R / Center / Subwoofer : 12.0 ft (3.60 m)
Surround L / Surround R : 10.0 ft (3.00 m)
• Set the difference in the distance between the speakers to less than
20.0 ft (6.00 m).
NOTE
"Distances" cannot be set for speakers with "Speaker Config."
(vpage 99) set to "None".
99
Setting details
, the "Resets all of the distance
ENTER
.
v See overleaf
Speakers