Listening To Fm/Am Broadcasts - Denon AVR-E300 Owner's Manual

Listening to FM/AM broadcasts

For antenna connections, see "Connecting an FM/AM antenna"
(vpage 17).
How to tune in
The modes for receiving FM broadcasts consists of "Auto" mode
that automatically searches available broadcast stations and "Manual"
mode that lets you tune in using buttons to change the frequency. The
default setting is "Auto". You can also use "Direct Tune" to tune in by
entering the frequency directly.
In "Auto" mode, you cannot tune in to radio stations if the reception is
not good. If this is the case, then use the "Manual" mode or "Direct
Tune" to tune in.
DVD
Listening to FM/AM broadcasts
1
TUNER
Press to switch the input
source to "TUNER".
GTV ScreenH
FM 92.10MHz AUTO
CH 1
TUNER
Tune Preset Option
TUNE+/- CH+/- OPTION
GDisplay of this unitH
01 FM 92.10MHz
2
OPTION
Press .
The option menu screen is displayed.
3
ui
Use to select "FM/AM", then press
The Band screen is displayed.
GTV ScreenH
Option
FM/AM
Direct Tune
Preset Memory
Tune Mode
Auto Preset
Preset Name
Preset Skip
FM 92.10MHz
Video Select
TUNER
Tune Preset Option
TUNE+/- CH+/- OPTION
GDisplay of this unitH
FM/AM
35
4
o p
Use to select "FM" or "AM", then press
FM When listening to an FM broadcast.
When listening to an AM broadcast.
AM
5
TUNE +
Press
want to hear.
ENTER
.
Scanning is performed until it finds an available radio station.
When it finds a radio station, it stops the scan automatically
and tunes in.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
–
to change frequencies continuously.
AUTO
CH 1
ENTER
.
GTV ScreenH
FM/AM
FM
GDisplay of this unitH
FM/AM :• FM –
TUNE –
or to select the station you
TUNE + or TUNE