Denon AVR-E300 Owner's Manual page 89
Integrated network av receiver
Hide thumbs
Also See for AVR-E300:
- Service manual (167 pages) ,
- Getting started (10 pages) ,
- Getting started (10 pages)
Table of Contents
Advertisement
Dialog Level
Adjusts and enhances the frequency band corresponding to the human voice at the center channel to
make the voice clearer.
Setting items
Level
–12dB – +12dB (0dB)
Subwoofer Level
This setting adjusts the volume level for the subwoofer.
Setting items
Subwoofer
On : The subwoofer is used.
Off : The subwoofer is not used.
Turn subwoofer output on
and off.
NOTE
This can be set when the sound mode is "DIRECT"
the "Subwoofer Mode" (vpage 101) is "LFE+Main".
Subwoofer Level
–12dB – +12dB (0dB)
This setting adjusts the
volume level for the
subwoofer.
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
(vpage
69) and
Surr.Parameter
You can adjust the surround audio sound field effects to match your preferences.
The items (parameters) that can be adjusted depend on the signal being input and the currently set
sound mode. For details on the adjustable parameters, see "Sound modes and surround parameters"
(vpage 118).
NOTE
Some setting items cannot be set while playback is stopped. Make the settings during playback.
Setting items
Cinema EQ
On : "Cinema EQ" is used.
Off : "Cinema EQ" is not used.
Gently softens the upper
treble range of movie
soundtracks to reduce
possible harshness and
improve clarity.
Loudness Mngmt
On : Outputs using the settings made in "Dynamic Comp." and "Dialogue
This can be set in the
Normalization" (vpage 108) are enabled.
Off : "Dynamic Comp." settings and "Dialogue Normalization" are
Dolby TrueHD mode. This
sets whether to output
disabled, and the signals on the disk are output as is.
as specified in "Dynamic
Comp." or output directly
without compressing the
dynamic range of audio
recorded in the disc.
Dynamic Comp.
Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range
source.
Low / Medium / High : These set the compression level.
(difference between loud
and soft sounds).
Off : Dynamic range compression is always off.
You can set "Auto" only for the Dolby TrueHD source.
86
Audio
Default settings are underlined.
Setting details
v See overleaf
Hide quick links:
Advertisement
Table of Contents
