Setup For Unix - Axis 5470 User Manual

AXIS 5470e/570/670e User's Guide

Setup for UNIX

Before you start:
To establish communication with the TCP/IP network, you must assign an IP address to your AXIS
5470e/570/670e Print Server. Refer to Assigning an IP address, on page 9.
Having performed the basic TCP/IP setup procedures, you are now able to print in interactive
mode using FTP or Reverse Telnet protocols. However, if you want to integrate the AXIS
5470e/570/670e into your host spooler, you can use the Axis automatic installation script axinstall.
This utility software is resident on the AXIS 5470e/570/670e and can be downloaded to your host
using FTP. It can also be downloaded from the software\prt_srv\utility\axinstall\latest folder on the
AXIS Product CD and from the Axis WWW home page at http://www.axis.com/.
Follow the procedure below to download axinstall to your host using FTP:
1. Log in to the AXIS 5470e/570/670e by typing:
ftp <host name>
2. Enter as the user id and
root
3. Download the axinstall utility by typing:
get axinstall
Follow the procedure below to install the AXIS 5470e/570/670e using the axinstall script:
1. Type the command:
in the UNIX shell window.
sh axinstall
2. Follow the instructions that appear when the script is started.
When the AXIS 5470e/570/670e is installed, it will appear as it is directly connected to the host
printer spooler.
or
ftp <IP address>
as the password.
pass
in the UNIX shell window.

Setup for UNIX

39