Configuring The Axis 5470E/570/670E For Sna Printing - Axis 5470 User Manual

AXIS 5470e/570/670e User's Guide

Configuring the AXIS 5470e/570/670e for SNA Printing

Important!
To be able to perform the instructions presented in this section, you should first assign an IP address to your AXIS
5470e/570/670e using one of the methods presented in Assigning an IP address, on page 9. If your network does not
support the TCP/IP protocol suite, you can still configure the AXIS 5470e/570/670e using AXIS Netpilot.
Follow the instructions below to configure the AXIS 5470e/570/670e for SNA printing in the
Mainframe environment using a Web browser:
1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.
2. Enter the IP address or the host name of the AXIS 5470e/570/670e in the location field and
press the Enter key on your keyboard. The internal Web pages of the AXIS 5470e/570/670e
will appear.
Note:
To protect the admin pages and the Configuration Wizard from unauthorized use, enter a
password (default Pass) in the Root Password field under admin | General Settings.
3. Click the Configuration Wizard for IBM sessions button.
4. Click the Add Session button. This will start the Configuration Wizard which is a step-by-step
guide through the required configuration settings.
Mainframe SNA Printing
19