Netbios/Netbeui Printing Using Axis Print Monitor; Tcp/Ip; Windows - Axis 540+ User Manual

AXIS 540/640 User's Guide

NetBIOS/NetBEUI Printing using AXIS Print Monitor

For peer-to-peer printing, AXIS Print Monitor must be installed on all printing
clients, while it is only necessary to install it on the server for client-server printing.
Install the AXIS Print Monitor software, if you have not already done so. It is
supplied on the AXIS Online CD. It can also be downloaded from the AXIS WWW
home page at http://www.axis.com/. Once installed, the AXIS Print Monitor is
automatically initialized on system start-up.
Important!
As AXIS Print Monitor is an integral part of AXIS Print System, you should NOT install an
independent version of AXIS Print Monitor if AXIS Print System is already installed on your client.
To install a printer with the AXIS Print Monitor, use the Microsoft Add Printer
Wizard, which is available in your Windows operating system. The AXIS Print
Monitor's built-in Help system describes, in step-by-step fashion, how to install your
printers as NetBIOS/NetBEUI, LPR or Raw TCP/IP printers. If you need help, start
the AXIS Print Monitor Help system from the AXIS Utilities folder or see the User's
Manual.
Note:
As the AXIS 540/640 emulates the behavior of a local printer port, you must select the Local
Printer (Windows 95 and Windows 98), My Computer (Windows NT) alternative when
performing the instructions in the Add Printer Wizard.
Setup for Windows 95/98 & NT
15