Setup For Windows 3.1 & Wfw; Tcp/Ip Printing; Netbios/Netbeui Printing - Axis 5470 User Manual

AXIS 5470e/570/670e User's Guide
Setup for Windows 3.1 & WfW

TCP/IP Printing

To enable TCP/IP printing in Windows 3.1 and Windows for Workgroups environments, it is
recommended that you use a shareware LPR spooler that can be downloaded from
ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/

NetBIOS/NetBEUI Printing

AXIS Print Utility for Windows is the preferred tool for NetBIOS/NetBEUI printing in Windows
3.1 and Windows for Workgroups environments.
Install the AXIS Print Utility for Windows software, if you have not already done so. It can be
downloaded from the software\prt_srv\utility\axpuw\1.04 folder on the AXIS Product CD and
from the Axis WWW home page at http://www.axis.com/
Peer-to-peer printing -
requires that all users install the AXIS Print Utility for Windows on their workstations. Follow
these steps to install your AXIS 5470e/570/670e for peer-to-peer printing at a Windows for
Workgroups or Windows 3.1 workstation:
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add. In the NPS Port list, select the AXIS 5470e/570/670e port to be
installed. The ports appear as <name>.LP1, <name>.LP2, and <name>.CM1, where
<name> is either AX followed by the last six digits of the AXIS 5470e/570/670e serial number
or a name you have previously given the AXIS 5470e/570/670e, for example
AX100B35.LP1 or DevDept.LP1.
Note:
LP2 and CM1 are not available for the AXIS 5470e.
3. Accept or change the suggested Windows port name, and type any comments in the
Description field. Make a note of the Windows port name as you will need this later. Click OK
to install the Windows port.
4. In the Port menu, click Connect to bring up the Windows Printers dialog.
5. Select a printer driver from the list of Installed Printers, or click Add>> to install a new driver.
Click Connect...
6. Select the Windows port name, defined in step 3, from the Ports list.
7. Click OK to close the Connect dialog, and Close to close Printers.
This print method is recommended for smaller networks and
Setup for Windows 3.1 & WfW
29