Hitachi SelecSet 900 Series User Manual page 90

Activating call
block for the
last calling
party
HCXTD850, Rev. A02, September 2001
To activate call block for the last calling party:
1
Lift your handset or press <SPKR>.
2
Listen for dial tone.
3
Enter the call block registration
feature access code or...
4
Press the call block key if one is programmed at your
phone.
5
Press the <#> key to block the most recent caller's
number.
6
Listen for confirmation tone (three short beeps).
Although you can activate call block using either of
these methods, it is recommended that you press <#>
to block the last calling party. This eliminates
confusion regarding the number of digits that must be
dialed to block a number (for example area code plus
office code plus number or office code plus number or
just number) depending on your telephone system
setup and your local dialing area.
Note: You can only block one number at a time.
Registering a new call block number
automatically overwrites the previous one.
B C
LOCKING A ALL
3-3