Hitachi SelecSet 900 Series User Manual page 112

Monitoring the
status of an
F-line
Placing a call
using an F-line
Answering a
call on an
F-line
HCXTD850, Rev. A02, September 2001
K
You can monitor the status of an F-line using your
SelecSet display. The status is displayed for the telephone
user who is off-hook at the F-line. To check the status of
the F-line, press your <DISPLAY> key. The display shows
the number of the party to which the other key group
member is connected on the F-line.
To place a call using an F-line, follow these steps:
1
Lift your handset OR press <SPKR> OR press the
F-line autodial key. Your speakerphone is activated.
2
LED lamps for an idle CAP and the F-line light. The
F-line lamp is green, indicating that you are
connected.
3
Dial your call. Remember to include the outside
access code if you are dialing an outside number.
To answer a call on an F-line, follow these steps:
1
Lift your handset or press <SPKR> or...
2
Press the F-line autodial key. The speakerphone is
automatically activated.
3
The call is automatically brought down to an idle
CAP, and all stations show a steadily lit red F-line
lamp. Your lamp, however, is green.
4
You are connected with your caller.
G 1A2 E
EY ROUP
F
MULATION UNCTIONS
3-25