Programming Speed Dialing Keys - Hitachi SelecSet 900 Series User Manual

P
ROGRAMMING

Programming Speed Dialing Keys

About
programmable
speed dial keys
Personal speed
calling setup
Canceling
speed calling
programming
1-26
S D
PEED IALING
Programmable autodial keys that are not programmed with
features default to autodial speed calling keys. Pressing a
programmed autodial key automatically dials the station or
outside phone number.
Follow these steps to set up personal speed calling
numbers:
1
Lift your handset or press <SPKR>.
Dial the station speed calling-register
access code.
2
Press the autodial key you want to program.
3
Dial the phone number you want stored at this key for
speed calling (including the outside access code if it is
an external call).
4
Wait for confirmation tone (three short beeps, about
five seconds).
Note: To re-program the key, repeat steps 1-5. The new
programming overwrites the old programming.
To cancel speed calling programming, follow these steps:
1
Lift your handset or press <SPKR>.
2
Dial the station speed calling
cancellation code.
3
Press the appropriate autodial key.
4 Wait for confirmation tone (three short beeps).
K
EYS
HCXTD850, Rev. A02, September 2001
S S 900 U
ELEC ET SER
G
UIDE