Hitachi SelecSet 900 Series User Manual page 115

P
AGING
To answer a
zone page with
auto meet-me
Zone paging
with park
Using zone
paging with
park
3-28
If someone uses zone page with auto meet-me to page you:
1
Lift your handset or press <SPKR>.
2
Dial the zone paging answer
feature access code.
3
You are automatically connected to the paging party.
You can use zone paging with park to page someone who
has a call.
To use zone paging with park, follow these steps:
1
Lift your handset or press <SPKR>.
2
Press the <ZPG/P> (zone paging with park) key or
dial the zone paging with park feature access code.
3
Dial the proper zone number.
4
Dial a parked call identifier (PCI) (beeper
identification number.)
5
Once the PCI is dialed, you can do one of two things.
- Hang up to complete the park or...
- Press <CONF> to establish a three-party conference
when the paged party responds.
Note: A PCI is a number used to identify a parked
call. Contact your system administrator for a
list of the PCIs used with your system, or use
your own station number or that of the paged
party.
S
ELEC
HCXTD850, Rev. A02, September 2001
S 900 U G
ET SER UIDE