Parking A Call - Hitachi SelecSet 900 Series User Manual

Parking a Call

About call
park
Parking a call
(without
paging)
Parking a call
(with paging)
HCXTD850, Rev. A02, September 2001
You can use call park to park a call (place a call on hold)
that can be retrieved from any other SelecSet phone.
To park a call (without paging), follow these steps:
1
While on a call you want to park, press <TRFR>.
2
Press the <PARK> key or...
3
Dial the call park feature access code.
4
Dial a parked call identifier (PCI). Hang up to
complete the park.
To park a call (with paging), follow these steps:
1
While on a call you want to park, press <TRFR> or
<CONF>.
2
The <TRFR> lamp lights, the call is held and an idle
CAP is selected.
3
Press the <ZPG/P> key or dial the
zone paging feature access code.
4
Dial a zone number for zone paging, plus a PCI
(parked call identifier, which is the same as a beeper
identification number)
5
Listen for confirmation tone.
6
Hang up or press <TRFR> to complete the park or
press <CONF> to form a three-party conference.
P C
ARKING A ALL
3-31