Hitachi SelecSet 900 Series User Manual page 48

Using forced
account codes
Placing calls
using forced
account codes
and system
speed calling
HCXTD850, Rev. A02, August 2001
Depending on your class of service, you may have to enter
a forced account code before dialing a call to access an
outgoing trunk. If you do not enter the forced account
code, you hear reorder tone.
To use a forced account code:
1
Lift your handset and listen for dial tone.
2
Enter the feature access code
for forced account code
which tells the system you're
entering a forced account code.
3
Enter your personal forced
account code.
4
Dial your number.
If you are restricted from making certain types of calls by
your class of service, you can place these calls by entering
a forced account code with a system speed calling number.
To do this:
1
Lift your handset and listen for dial tone.
2
Enter the forced account code
feature access code.
3
Enter the forced account code.
4
Enter the system speed calling
feature access code.
5
Enter the system speed calling number.
Note: Contact your system administrator for a list of the
account codes used at your company.
A C
CCOUNT ODES
2-11