Culligan Gold Series Cullneu Filter 9" And 10" Pds; Performance Data Sheet - Culligan Gold Series Owner's Manual

Culligan knows the more informed you are about your water treatment systems, the more confident you will be
about its performance. It's because of this and more than seventy years of commitment to customer satisfaction that
Culligan is providing this Performance Data Sheet to its customers.
Important Note: Read this Performance Data Sheet and compare the capabilities of this unit with your actual
water treatment needs. It is recommended that before purchasing a water treatment unit, you have your water
supply tested to determine your actual water treatment needs.
Manufacturer: Culligan International Company
9399 West Higgins Road, Suite 1100, Rosemont, IL 60018 USA
(847) 430-2800
www.culligan.com
Product: Culligan Gold Series 9" Cullar & 10" Cullar Filter
Testing Conditions & Results:
Capacity: 120,000 gallons for the 9" Filter
180,000 gallons for the 10" Filter
pH: 7.6
Service Flow: 4.0 gpm @ 3.0 psi for the 9" Filter
6.0 gpm @ 6.0 psi for the 10" Filter
Operating Conditions:
Operating Temperature Range:
Water Pressure Range:
Water Pressure Range (Canada):
Electrical Characteristics:
Substance Reduction
While testing was performed under standard laboratory conditions, actual performance may vary.
Model Substance
9" Cullar Chlorine
Taste & Odor
10" Cullar Chlorine
Taste & Odor
The Culligan Gold Series Cullar filter has been tested and certified by WQA against WQA S-200 and NSF/ANSI
42 for the effective aesthetic reduction of chlorine taste and odor up to 120,000 gallons for the 9" filter and
180,000 gallons for the 10" filter. The concentration of the indicated substances in water entering the system was
reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in
NSF/ANSI 42.
Performance Indicator: If water flow decreases or a Noteable taste change occurs, the filter should be
backwashed. If conditions do not improve, contact your local Culligan Man
requires servicing. Do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system. Refer to the specifications and warranty sections of this owners guide for
more specific product information.
To avoid contamination from improper handling and installation, your system should only be installed and serviced
by your Culligan Man. Performance will vary based on local water conditions. The substances reduced by this
product are not necessarily in your water.
33 - 120°F (1 - 50°C)
20 - 120 psi (140 - 830 kPa)
20-90 psi (140-620 kPa)
24V/50-60 Hz, 45 Watts
USEPA Average %
SDWA MCL Reduction
N/A 99
N/A 98.9
Pressure: 60 psi
Temperature: 63°-73°F (17°-23°C)
Min. % Avg Test
Reduction Influent
Concentration
Level
99 1.92 mg/L
98.6 2.11 mg/L
® . He can determine if your filter
Performance
Data Sheet
Avg Test
Effluent
Concentration
Level
0.02 mg/L
0.02 mg/L
12