Clutch; Drive - Cannondale E440 2003 Owner's Manual

the brake pads need to be replaced with new ones as
a s e t . C o n t a c t a n a u t h o r i z e d C a n n o n d a l e
Motorsports dealer for replacement.
Wear indicator
1.
a. Minimum thickness

CLUTCH

Adjusting the clutch lever position
CAUTION :
The adjusting screw can be turned within
certain limits. Do not use excessive force when
turning the screw.
1. To adjust the lever position, turn the adjusting
screw clockwise to reduce the distance between
the lever and the handle grip; turn the adjusting
WARNING
2003 Motorcycle OM.fm
© 2002 Cannondale Corporation - All Rights Reserved
(1)
(a)
Indicates a potential hazard that could result in serious injury or death.
screw counterclockwise to increase the distance
between the clutch lever and handle grip.
Adjusting screw
1.
a. Increases distance
b. Reduces distance

DRIVE

Cleaning and lubricating the drive chain
Clean and lubricate the drive chain before every ride,
after washing the vehicle, after operating in wet or
dusty conditions, and before measuring chain slack.
WARNING
POTENTIAL HAZARD
A "dry" drive chain
WHAT CAN HAPPEN
A dirty and/or "dry" (unlubricated) drive
chain can quickly wear out and possibly fail
or contribute to unsafe conditions, damage
the brake disc adversely affecting brake per-
formance and possibly causing an accident.
HOW TO AVOID THE HAZARD
Clean and lubricate the drive chain before
every ride.
1. To clean the chain, lightly brush away heavy soils
with a small soft bristle (nylon) brush. Do not
scrub the chain; the O-rings can be damaged.
Use a mild dish washing detergent and water
54