Lighting Option; Trip Computer - Cannondale E440 2003 Owner's Manual

Hide thumbs Also See for E440 2003:
Table of Contents

Advertisement

If either headlight or taillight does not light, check to
see if a fuse or bulb replacement is needed. .
Lighting switch
1.
WARNING
POTENTIAL HAZARD
Removing your hands from the handlebar
when operating
WHAT CAN HAPPEN
You can lose control of the vehicle and have
a serious accident.
HOW TO AVOID THE HAZARD
Select HI or LO intensity before moving off to
ride. Do not remove your hands from the
handlebar to toggle the switch while the
vehicle is moving. You could lose control
and have an accident.
NOTE :
Switch the lights off before attempting to start the
engine.
Be sure to return the switch to the center position
when the lighting is not required.

LIGHTING OPTION

Optional lighting tap (non-fused)
1.
Main fuse
2.
Engine Management System power relay
3.
Your vehicle may have optional lighting power takeoff
connector. This connector can be used to install
approved lighting systems. The connection for
optional lighting is located under the seat near the
main fuse and engine management system relay.
Do not improvise; contact your Cannondale Motor-
sports dealer to install the optional lighting system.

TRIP COMPUTER

Trip computer

1.
A trip computer is located in the center of the han-
dlebar.
15
15
Printed : 8/15/02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C440 2003X440 2003S440 2003

Table of Contents