Imaging Problems (For Both Digital And Analog) - Eizo FlexScan EV2316W User Manual

Color
Hide thumbs Also See for FlexScan EV2316W:
Table of Contents

Advertisement

Problem
2. The message below appears.
• Themessageshowsthattheinputsignalis
outofthespecifiedfrequencyrange.
Example:

5-2. Imaging problems (for both digital and analog)

Problem
1. The screen is too bright or too dark.
2. Characters are blurred.
3. Afterimages appear.
4. Green / red / blue / white dots or defective
dots remain on the screen.
5. Interference patterns or pressure marks
remain on the screen.
6. Noise appears on the screen.
42
Chapter5Troubleshooting
Possible cause and remedy
Thismessageappearswhenthesignalisnotinputcorrectly
evenwhenthemonitorfunctionsproperly.
• CheckwhetherthePCisconfiguredtomeettheresolution
andverticalscanfrequencyrequirementsofthemonitor
(see"2-1.CompatibleResolutions"(page14)).
• RebootthePC.
• Selectanappropriatesettingusingthegraphicsboard's
utility.RefertotheUser'sManualofthegraphicsboard
fordetails.
Possible cause and remedy
• Use"Brightness"or"Contrast"intheSettingmenuto
adjustit.(TheLCDmonitorbacklighthasalimitedlife
span.Whenthescreenbecomesdarkorbeginstoflicker,
contactyourlocalEIZOrepresentative.)
• Ifthescreenistoobright,turnonAutoEcoView.The
monitordetectstheenvironmentalbrightnesstoadjustthe
screenbrightnessautomatically.
• CheckwhetherthePCisconfiguredtomeettheresolution
andverticalscanfrequencyrequirementsofthemonitor
(see"2-1.CompatibleResolutions"(page14)).
• Whenanimageisdisplayedwitharesolutionotherthan
recommended,thecharactersorlinesofthedisplayed
imagemayblur.Use"Smoothing"and"ScreenSize"inthe
Settingmenutoadjustthedisplay(see"Tomodifyblurred
characters/lines"(page28),and"ScreenSizeChanging"
(page29)).
• AfterimagesareparticulartoLCDmonitors.Avoid
displayingthesameimageforalongtime.
• Usethescreensaverorpowersavefunctiontoavoid
displayingthesameimageforextendedperiodsoftime.
• ThisisduetoLCDpanelcharacteristicsandisnota
failure.
• Leavethemonitorwithawhiteorblackscreen.The
symptommaydisappear.
•
IntheSettingmenu,set"Overdrive"to"Off"(see"Toset
overdriveintensity(EV2336W/EV2436Wonly)"(page23)).
• WhenenteringtheHDCPsignals,thenormalimagesmay
notbedisplayedimmediately.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexscan ev2336wFlexscan ev2416wFlexscan ev2436w

Table of Contents