Connection Procedure (Setup Of Usb Function); Displaying Monitor Information - Eizo FlexScan EV2316W User Manual

●

Connection Procedure (Setup of USB Function)

1. Connect the monitor first to a PC using the signal cable, and run the PC.
2. Connect the supplied USB cable between the USB downstream port of a USB compatible PC (or another
USB hub) and the monitor's USB upstream port.
The USB hub function is set up automatically upon connection of the USB cable.
3. Connect the peripheral USB device to the USB downstream port of the monitor.

6-6. Displaying Monitor Information

This function allows you to display the model name, serial number, usage time, resolution, and input signal.
Procedure
1. Choose "Information" in the Setting menu, and press
The "Information" menu appears.
Attention
• The usage time is not always "0" when you purchase the monitor due to factory inspection.
USB
downstream
port
USB
upstream
port
.
Chapter6Reference
53