Assembly Instructions; Step 1: Front Wheel Assembly - Stanley 36FS Owner's Manual

Step 1: Front Wheel Assembly

Note: Some mowers may be shipped with the front
wheels pre-assembled.
A. Remove packaging materials surrounding the
front wheels and remove the bolt threaded into
the front wheel. Retain this bolt and washer for
future use.
B. Unscrew the fastener holding the bolt to the
steel shipping rack. Set the nut and bolt aside. It
will be re-used in the mower assembly process.
C. Remove the mower from the steel shipping rack.
D. Slide the front wheel pivot shaft through the
sleeve. If the fit is tight, apply some grease to
the pivot shaft.
E. Secure the shaft in place with the bolt and
hardware that were provided with the wheel.
F. Repeat steps A through E for the second front
wheel.
G. Apply grease to the front wheel sleeve grease
fittings when complete.
Rev: Mar2011

Assembly Instructions

®
STANLEY Finish Mower
6
36FS, 54FS