Table of Contents
Advertisement
SETUP menu
SETUP menu (continued)
Item
STANDBY MODE
MONITOR OUT
38
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL ó SAVING
When SAVING is selected, the power consumption in the standby
mode is lowered with some functional restriction as below:
• When SAVING is selected, the communication control (RS-232C)
is disabled except to turn the projector on while the projector is in
the standby mode.
• When SAVING is selected, AUDIO OUT STANDBY setting of
AUDIO (39) is invalid, and no signal is output from AUDIO OUT
ports in the standby mode.
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
MONITOR OUT port while an image from the port chosen in the (1)
is on screen.
(1) Choose a picture input port using ▲/▼ buttons.
QUIT ó COMPUTER(IN)1 ó COMPUTER(IN)2
STANDBY
VIDEO ó S-VIDEO ó COMPONENT
• Choose STANDBY, to select the output signal from the MONITOR
OUT port in the standby mode.
• While QUIT is selected, pressing the ◄ button returns to the
previous menu.
(2) Select one of the COMPUTER IN ports using ◄/► buttons.
Choosing the COMPUTER 1 allows the following choice.
1 (COMPUTER IN1) ó OFF
Choosing the COMPUTER 2 allows the following choice.
2 (COMPUTER IN2) ó OFF
Choosing other input or STANDBY allows the following choice.
1 (COMPUTER IN1) ó 2 (COMPUTER IN2) ó OFF
• OFF disables the MONITOR OUT port.
Description
(Y, C
/P
, C
/P
)
B
B
r
r
Advertisement
Table of Contents
