Table of Contents
Advertisement
Quick Links
Data Video Projector
User's Manual (Concise)
Information in this Guide may change due to product improvements. To obtain the latest
manuals, literature, and software please visit the Dukane web site at; www.dukane.com/av
and look at the specific model SUPPORT or DOWNLOADS section.
DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032
Fax 630-584-5156
avservice@dukane.com
www.dukane.com/av
MODEL 8103H
403-8103H-C-00 Concise
Advertisement
Table of Contents
Related Manuals for Dukane 8103H
Summary of Contents for Dukane 8103H
- Page 1 MODEL 8103H Information in this Guide may change due to product improvements. To obtain the latest manuals, literature, and software please visit the Dukane web site at; www.dukane.com/av and look at the specific model SUPPORT or DOWNLOADS section. DUKANE CORP AV SERVICE DEPT...
-
Page 2: Table Of Contents
Projector 8103H User's Manual (concise) Thank you for purchasing this product. Please read the manuals for the product beforehand, in order to use the product safely and more effectively. To read the manuals in the CD, see the “ 15. Using the CD manual ”... -
Page 3: Checking The Contents
1. Checking the contents Check that all the following items are included. If any items are missing, tell your dealer soon. (1) Projector MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE VOLUME (2) Remote control with two batteries ＋... - Page 4 2. Arrangement (continued) Refer to the following for the projection distance. The values shown in the table are calculated for a full size screen: 1024 x 768. : Screen size (diagonal) : Projection distance (±8%) : Screen height (±8%) C1 C2 Table for 4:3 screen inch inch...
-
Page 5: Connecting With Your Devices
3. Connecting with your devices Before connecting them, make sure that the devices are suitable to connect with this projector, and prepare the required signal cables and adapters. Consult your dealer if the accessory that is not included in this product is required. Refer to the following for connection. -
Page 6: Connecting With A Power Supply
4. Connecting with a power supply Before connection, confirm that the power outlet AC Inlet is suitable for this projector and the power cord. Then follow the procedure below for connection. Insert the end of the power cord with the socket into the AC inlet of the projector. -
Page 7: Using The Security Bar And Slot
5. Using the security bar and slot This projector has the security bar for a commercial anti-theft chain or wire up to 10 mm Security slot in diameter, and also the security slot for the Kensington lock. For details, see the manual of the security tool. NOTE •... -
Page 8: Preparing For The Remote Control
7. Preparing for the remote control The accessory remote control needs batteries. Use the batteries included in this product or two new batteries of the specified type: HITACHI MAXELL , part number LR6 or R6P . Follow the following procedure. Remove the battery cover in the back of the remote control. -
Page 9: Starting The Projector
8. Starting the projector Turn on the projector and the connected devices. Turn on the projector ahead of other connected devices, unless mentioned in the manuals. For this projector, follow the procedure below. POWER indicator Press the side marked “ I ” of the power switch, as the power-on position. -
Page 10: Adjusting The Projection Position
9. Adjusting the projection position This projector has four elevator feet in the bottom. Use them to adjust the projection position. max. 43 mm Elevator feet CAUTION ■ Do not lengthen the elevator feet to 43 mm or more. The foot lengthened exceeding the limit may come off from the projector, and result in an injury. -
Page 11: Selecting An Aspect Ratio
10. Operation (continued) Selecting an aspect ratio ASPECT button Each time you press the ASPECT button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA on the remote control, it switches the VOLUME+/- button ASPECT AUTO SEARCH BLANK aspect ratio of the image, in turn. MAGNIFY FREEZE VOLUME... -
Page 12: Turning The Projector Off
11. Turning the projector off Turn the projector off after turning off the other connected devices, unless mentioned in the manuals. For this projector, follow the procedure below. Press the STANDBY/ON button (on the projector or remote control). The “ Power off? ” dialog appears on the screen POWER indicator for about 5 seconds. -
Page 13: Replacing The Lamp
12. Replacing the lamp The projection lamp has finite product life that is different in each lamp. Please replace the lamp as soon as possible when the pictures appear dark, or when the color tone is poor. Using the lamp for long periods of time may make the lamp burned out or broken. Preparation of a spare lamp and early replacement are recommended. - Page 14 12. Replacing the lamp (continued) NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. High High High WARNING Voltage Temperature Pressure ■ The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
-
Page 15: Maintaining The Air-Filter
13. Maintaining the air-filter Please check and clean the air-filter periodically, for keeping normal ventilation. When the indicators or a message prompts you to clean the air-filter, comply with it as soon as possible. When it is damaged or too soiled, replace the filter unit. To prepare the new filter unit, call your dealer and tell the type number: UX35381 Turn the projector off and unplug the power cord from the power outlet. -
Page 16: Caring For The Mirror And Lens
14. Caring for the mirror and lens If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the mirror and lens, being cautious of handling. Turn the projector off and unplug the power cord from the power outlet. -
Page 17: Using The Cd Manual
15. Using the CD manual The detailed manuals for this product are written into the included CD titled “ User’s Manual (detailed) ”. Before using the CD, please read the following to ensure the proper use. System requirements The system for using the CD requires the following. ®... -
Page 18: Regulatory Notices
This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity Trade name HITACHI Model Number Dukane Model 8103H Responsible Party Hitachi America, Ltd. Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A. Telephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules. -
Page 19: Warranty And After-Service
If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. Please check the following web address where you may find the latest information for this projector. http://www.hitachi.us/digitalmedia www.Dukane.com/av http://www.hitachidigitalmedia.com TRADEMARK ACKNOWLEDGMENT ® ®... -
Page 20: Specifications
18. Specifications Item Specifications Product name Liquid crystal projector Liquid Crystal Panel 786,432 pixels (1024 horizontal x 768 vertical) Lamp 230 W UHB Audio output Power supply AC 100-120 V/3.6 A, AC 220-240 V/1.5 A Power consumption 340 W Temperature range 5~35°C (operating) COMPUTER IN1..........