Updating Latitude And Longitude Data - KVH Industries M5 User Manual

TracVision M5/M7 User's Guide
Chapter 3 - Settings

Updating Latitude and Longitude Data

44
Use the flowchart in Figure 3-19
data.
TIP: For your convenience, you can determine your approximate latitude and
longitude using the Position Grids provided in
IMPORTANT!
You must restart the antenna after performing this procedure. For
more information on restarting the antenna, see
Antenna" on page 50.
Figure 3-19 Updating Latitude and Longitude Data
<Default Display>
Menu
Install Satellite?
Yes Next Return
Select Next until "Operations
mode?" is displayed.
Operations mode?
Yes Next Return
Get antenna status?
Yes Next Return
Select Next until "Control
antenna?" is displayed.
Control antenna?
Yes Next Return
to update your latitude and longitude
"Appendix B" on page
"Restarting the
Man control antenna?
Yes Next Return
Select Next Until "Set
Lat/Long?" is displayed.
Set Lat/Long?
Yes Next Return
Latitude: ##N
- Enter +
Longitude: ###E
- Enter +
Latitude: ##N
Longitude: ####E
73.
Select -/+ as
required to set
latitude and
longitude, then
select Enter.