Updating Latitude And Longitude Data - KVH Industries TracVision R1ST User Manual

Updating Latitude and Longitude Data

Use the flowchart in Figure 3-1 if you wish to update your latitude and
longitude data.
TIP: For your convenience, you can determine your approximate latitude and
longitude using the Position Grids provided in Appendix B on page 75.
Figure 3-1 Updating Latitude and Longitude Data
<Default Display>
Install Satellite?
Yes
Select Next until "Operations
Mode?" is displayed.
Operations Mode?
Yes
Get Antenna Status?
Yes
Control Antenna?
Yes
Menu
Next Return
Next Return
Next Return
Next Return
TracVision M5/M7 User's Guide
Chapter 3 - Settings
Man Control Antenna?
Yes Next Return
Select Next Until "Set
Lat/Long?" is displayed.
Set Lat/Long?
Yes Next Return
Press - or + to toggle each
digit to the desired value, then
press Enter to accept each digit.
Latitude: ##N
- Enter +
Press - or + to toggle each
digit to the desired value, then
press Enter to accept each digit.
Longitude: ###E
- Enter +
Restarting Antenna
29