Setting The Mcp To Track Different Satellites (Circular Version Only) - KVH Industries M5 User Manual

Setting the MCP to Track Different Satellites
(Circular Version Only)
If you wish to change which satellites your TracVision M5/M7 system
tracks, you must perform the following:
1. Update latitude and longitude data
2. Select a tracking mode
3a. Set up Automatic TriSat Mode
3b. Set up Manual TriSat Mode
3c. Set up DualSat Mode
TIP: Be sure to only install satellites that your TracVision M5/M7 can
track in your geographic location. For your convenience, KVH provides
links to several websites that offer satellite coverage information. Simply
visit our website at www.kvh.com/footprint.
Step 1 - Update Latitude and Longitude Data
Use the flowchart in
data.
TIP: For your convenience, you can determine your approximate latitude and
longitude using the Position Grids provided in
Figure 3-13 Updating Latitude and Longitude
<Default Display>
Select Next until "Operations
Mode?" is displayed.
Operations Mode?
Yes
Get antenna Status?
Yes
Select Next until "Control
Antenna?" is displayed.
Control antenna?
Yes
Figure 3-13 to update your latitude and longitude
Man control antenna?
Yes
Menu
Select Next until "Set
Lat/Long?" is displayed.
Next Return
Select -/+ as required, then
select Enter.
Next Return
Latitude:
Select -/+ as required, then
select Enter.
Next Return
Longitude:
Latitude:
Longitude:
TracVision M5/M7 User's Guide
"Appendix B" on page
Next Return
Set Lat/Long?
Yes Next Return
##N
- Enter +
###E
- Enter +
##N
###E
Chapter 3 - Settings
73.
37