Stamina 55-1779 ELLIPTICAL Owner's Manual page 13

COMPUTER INSTRUCTIONS
LCD DISPLAY INSTRUCTIONS
Indicates the program selected has started.
Indicates the program selected has stopped. You must be in STOP mode to setup the
programs.
Displays programs for selection during setup, from P1 to P16.
Displays the selected program during exercise.
Displays resistance level of the current interval of program, from 1 to 16.
Indicates the gender (Male or Female) selected for the Body Fat Program.
Displays flashing "0:00" for preseting the program time during setup, from 5:00 to 99:00.
Displays the time during exercise, from 1 sec up to 99:59 minutes.
Displays HEIGHT for input when you select the Body Fat Program, from 44 to 98 inches.
Displays WEIGHT for input when you select the Body Fat Program, from 23 to 440 lbs.
NOTE: Maximum body weight for user is 250 lbs.
Displays the current speed, from zero to 99.9 Mile/Hr, or RPM, from 0 to 999 rpm.
Press "MODE" button to select the display of SPEED or RPM.
If the program time is "0:00", displays flashing "0.0" for preseting the DISTANCE of
program during setup, from 1 to 999 mile.
Displays the distance during exercise, from zero to 999.9 miles, or ODOMETER, from 0
to 9999 miles. Press "MODE" button to select the display of DISTANCE or ODOMETER.
Displays the percentage of body fat in Body Fat Program.
Displays the CALORIES burned, from zero to 999.9 Kcal, or WATT, from 0 to 999.9
watt. Press "MODE" button to select the display of CAL or WATT.
NOTE: The calorie and watt readouts are an estimate for an average user. It should be
Displays the BMR in Body Fat Program. (BMR is Basal Metabolic Rate. See page 18.)
used only as a comparison between workouts on this unit.
13