Assembly - Quinny Buzz CV059 User Manual

TM
1
Install Rear Wheels
Press the button in while
sliding the rear wheel axle
into the frame until you hear
a "click" (Figure 1). Repeat
for other rear wheel. Pull
to confirm it is assembled
securely.
2
Attach Shopping
Basket
Slide tab into tube at the
front center (Figure 2).
Secure an adhesive strap
around frame above each
rear wheel (Figure 2a).
3
Install Front Wheel

Assembly

Squeeze the front wheel
fork while inserting it into
the frame tube. Push front
wheel fork into frame tube
until you hear a "click"
(Figure 3). Pull to confirm it
is assembled securely.
1
2
2a
3
4
Unfold Stroller
Unfasten the transport hook
and push the handlebar
upward (Figure 4).
The frame will unfold
itself. The handlebar will
lock into place with a
"click" (Figure 4a).
NOTE: The Buzz
stroller frame
TM
has a unique mechanism that
1
enables the automatic unfolding
of the frame. The temperature
can effect the functioning of this
mechanism. In cold or frosty
2
weather, the stroller may unfold
more slowly than usual (at room
temperature).
5
Adjust Handlebar
Height
Squeeze the adjustment
button and slide the
handlebar to desired height
(Figure 5). The handlebar
will click into place.
6
Parking Brake
Always use the parking
brake, even when
standing still for only a few
moments! Push down on
the red pedal (P) behind
the rear wheel to set the
parking brake (Figure 6).
Push the opposite pedal
to release the parking
brake.
3
Assembly
4
1
2
4a
5
6
2