Assembly - Quinny zapp xtra Cv217 User Manual

1
Unfold Stroller Frame
Unfasten transport strap
(see parts list image).
Gently lift on the sides of
the stroller (Figure 1).
Pull out on grey pedal until
you hear a "click" (Figure
1a).
Lift up on top of stroller seat
as shown until it clicks into
place (Figure 1b). Tip: While
lifting up seat top hold down
lower portion of seat
Push in on button
(Figure 1c).
TM
1
1
1a
2
1b
1c
4
Push in on button
up on the handles until they
click into place (Figure 1d).
Extend the handle crossbar
into the horizontal position
until you hear a "click"
(Figure 1e).
2
Install Rear Wheels
Insert the rear wheel axle
into the frame until you hear
3
a "click" (Figure 2). Repeat
for other rear wheel. Pull
to confirm it is assembled
securely.
3
Install Front Wheels
Position front wheel as
shown with Quinny logo
facing outward. Insert front
wheel until you hear "click"
(Figure 3). Repeat for other
front wheel. Pull to confirm it
is assembled securely.
5

Assembly

1d
. Lift
6
1e
2
8
3
9
5
7