Assembly - Quinny Buzz Stroller User Manual

Assembly

NOTES: The seat can be positioned facing backward or for-
ward. The Buzz TM seat is suitable for children from 6 months to
age 4 (maximum 50-LBS. / 22.73-kg). If your child is unable to
sit up unassisted, use the semi-reclined position only.
7
Attach Seat Facing
Handlebar
Slide both sides of the
seat into the frame until
you hear each side click
and the RED INDICATOR
IS NOT VISIBLE on the
seat release buttons
(Figure 7).
Adjust Recline
The rear-facing seat can
be adjusted to two posi-
tions; a sitting position
and a semi-reclining posi-
tion. Do not recline the
seat fully. Push the but-
tons on both sides down-
ward and tilt the seat to
the desired position
(Figure 7a).
WARNING
indicator is visible (Figures 7 & 8). DO NOT use
with seat in this position.
UPRIGHT RECLINED
7
Red
Indicator
7a
DO NOT use when red
WRONG
8
Attach Seat Facing
Forward
Slide both sides of the seat
into the frame until you
hear each side click and the
RED INDICATOR IS NOT
VISIBLE on the seat release
buttons (Figure 8).
Adjust Recline
The forward-facing seat can
be adjusted to two posi-
tions; a sitting position and
a semi-reclining position.
Push the buttons on both
sides downward and tilt the
seat to the desired position
(Figure 8a).
9
To Remove Seat
Push the buttons on both
sides downward and lift
the seat from the frame
(Figure 9).
10
Canopy
Clip each side of the
canopy onto the frame
until it clicks into place
(Figure 10). NOTE: Height
of canopy may be adjusted
by sliding it up and down
the frame (Figure 10).
The sunshade may be
pulled forward.
4
TM
8
Red
Indicator
8a
9
10