Quick Installation Tips; Using The Remote Control Unit - Sharp LC-42SB45U Operation Manual

QUICK REFERENCE
Quick Installation Tips
3
Bundle the cords properly with the cable tie.
POWER
. - - - POWER indicator
o
4
How to turn on the television for the first time.
A) Press POWER on the television.
B) The POWER indicator on the front of
the television lights GREEN.
~
q
CH
c5
a
INPUT
o
1
Attach your antenna to the back of the television.
(See page 8.)
2
Connect the AC plug for the television into the AC
outlet.
~
'------I,\---C]::D..
I
AC outlet
I
• Place the N close to the AC outlet, and keep the power
plug within reach,
ImDJ
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
mm
• Speakers cannot be detached from the N.
• N angle cannot be adjusted.
Using the Remote Control Unit . .
, - - - - - - Remote control sensor
)~t9'---_POWERindicator
. . . . I "
3 0 " - - 3 0 "
, I /
30"
~
17'(5m)
II
Use the remote control unit by pointing it towards the remote control sensor on the lV. Objects between the
remote control unit and the remote control sensor may prevent proper operation .
• Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
• The remote control unit may not work properly if the remote
control sensor on the N is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the N, or operate the remote control unit closer to the
remote control sensor,
IMPORTANT:
The POWER indicator on the television should light GREEN indicating you have power to the television.
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION
STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
@-7