Setup Menu - Sharp LC-42SB45U Operation Manual

On-Screen Display Menu
Setup Menu
Example
1
Press
MENU
to display the MENU screen, and then
press
li/'~
to select "Setup" and press
~
to enter
it.
2
Press
~l~
to select a specific adjustment item and
press
~
to enter the setting.
3
Press
~/~
to select the setting and press
ENTER
to confirm the change.
4
Press
MENU
to exit.
Language Setting
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Auto CH Search Setting
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your IV when selecting Air or Cable.
• When Air is selected, the IV detects antenna signals.
It searches for NTSC and ATSC channels available
in your area.
• When Cable is selected, the lV detects signals
supplied by cable. It searches for NTSC, ATSC, and
QAM modulated channels available in your area.
Input Source Setting
Lets you set the input terminal displayed when using
the Input source menu or channel display. Press
IIiJ~
to select the new name for the input mode.
ImD
• If INPUT 7 is selected without signal input, then the IV will
turn off automatically after 30 seconds approximately.
Clock Setting
This function allows you to use the 1V as a clock.
Use
Ji'/"
to set the time (Hour/Minute/AM or PM) and
press
ENTER
to confirm the change.
Favorite Channels Setting (only in TV mode)
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
To register your favorite channel:
1 Press MENU on the remote control and select
"Setup"I"Favorite channels".
2 Press . /.. to select your desired channel and press
~
or the ENTER button to confirm.
To delete your favorite channel:
1
Press MENU on the remote control and select
"Setup"I"Favorite channels".
2 Press
.1"
to select "All data clear" and press
~
to
start clearing all favorite channel data.
ImD
• Before setting the channel, select the channel you want to
register as a favorite channel.
• While watching, you can toggle the selected channels by
pressing the
A,
B, C and D button on the remote control.
Current Software Info
This function displays 1V software information.
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1mB
• The channel setup settings will not be changed.
• The language setting will not be changed.
• The PIN number setting will not be changed.
Picture Adjustment Setting (only in PC mode)
Auto adjust: Automatically adjusts picture to the best
image position, phase, and clock setting.
Manual adjust: Allows to manually fine tune the image
as it appears on the screen.
• Phase: Eliminates the horizontal interfering lines.
• Clock: Eliminates the vertical interfering lines.
• Horizontal: Adjusts the horizontal placement of the
picture:
• Vertical: Adjusts the vertical placement of the
picture.
@-
23