Quick Installation Tips; Experiencing Hd Images - Sharp Aquos LC-80LE857U Operation Manual

Liquid crystal television
Hide thumbs Also See for Aquos LC-80LE857U:
Table of Contents

Advertisement

QUICK REFERENCE
■ LC-90LE657U/LC-80LE657U/LC-80LE650U/
LC-80C6500U
1
Confirm that there are 12 screws (8 long screws
and 4 short screws) supplied with the stand unit.
2
1 Set the post for the stand unit onto the
polystyrene foam.
2 Attach the base to the post.
3 Insert and tighten the 8 screws into the 8
holes on the bottom of the base.
• Hold the stand unit securely with one hand,
and then tighten the screws.
■ LC-90LE657U
3
Long
screws
2
1
1
FRONT
■ LC-80LE657U/LC-80LE650U/LC-80C6500U
3
Long
screws
2
1
1
FRONT
3
Build the work table. (See page 7.)
4
1 Insert the stand into the openings on the
bottom of the TV.
• Make sure that the stand is fi rmly inserted into
the TV. Improper installation may result in tilting
of the TV set.
2 Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
Short screws
Soft cushion
2
2
1
1

QUICK INSTALLATION TIPS

1
Attach your antenna to the back of the television.
(See page 10.)
2
Connect the AC plug for the television into the
AC outlet.
• Place the TV close to the AC outlet, and keep the
power plug within reach.
■ LC-80LE857U/LC-80LE757U
AC outlet
■ LC-90LE657U/LC-80LE657U/LC-80LE650U/
LC-80C6500U
*1
AC outlet
NOTE
• *1: Be sure to use the clamp to prevent the AC
cord from being unplugged.
(Except for LC-90LE657U)
■ LC-70LE657U/LC-70LE655U/LC-70LE650U/
LC-70C6500U
2
1
1
AC outlet
■ LC-60LE657U/LC-60LE655U/LC-60LE650U/
LC-60C6500U
2
1
1
AC outlet
Bundle the cords properly with the cable tie.
• When bundling the cords, use the AC cord holder
mounted on the TV. Relocate from A to B .
■ LC-70LE857U/LC-60LE857U
Remove and loosen
A
1
2
2
1
1
1
B
Attach and bundle together
■ LC-70LE757U/LC-60LE757U/
LC-70LE755U/LC-60LE755U/
LC-70C7500U/LC-60C7500U
Remove and loosen
A
1
2
2
1
1
1
B
Attach and bundle together
NOTE
• TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH UN-INSULATED PARTS OF ANY
CABLES WITH THE AC CORD CONNECTED.
3
When turning on the TV for the fi rst time, press
POWER on the television.
POWER
4
Insert the batteries into the remote control unit.
(See page 10.)
NOTE
• Speakers cannot be detached from the TV.
• The TV angle cannot be adjusted.

Experiencing HD Images

An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get
HD programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment
NOTE
• For information on updating to HD programming, ask
your cable/satellite service provider.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents