On-Screen Display Menu Operation; Menu Operation Buttons - Sharp LC-42SB45U Operation Manual

On-Screen Display Menu
On-Screen Display Menu Operation
Example
Example
~I~~~'-CD
®
@
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
• Exit • Next
o
Previous
G)
Item displayed in yellow
• This indicates the item currently selected.
• Press
~
to go to the adjustment screen for this item.
®
Item displayed in white
• This indicates that the item can be selected.
®
Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
- Nothing is connected to the selected input terminal.
- The function is not compatible with the current input
signal.
G)
Press ~/~ to enter the desired item or return to
the upper level menu.
®
Press
£,/T
to select the desired item.
®
Press
£,/T
to adjust the item.
mm
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Menu Operation Buttons
Using the remote control
Use the following buttons on the remote control to
operate the menu.
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
VOL
+ / - :
Cursor ....
/~
on the remote control.
CH V//\: Cursor T/1I;. on the remote control.
MENU:
1I;./T/....
/~:
ENTER:
RETURN:
Press to open or close the menu screen.
Press to select a desired item on the screen or
adjust a selected item.
Press to go to the next step or complete the
setting.
Press to return to the previous step.
MENU: MENU on the remote control or ENTER on
the remote control while OSD menu is on.
MENU
o
' " PUT
o
0"
@-
18