Positioning The Logs; Mineral Wool - Quadra-Fire SAPPHIRE-MBK Owner's Manual

G. Positioning the Logs
While still breakable, the logs do not become fragile until
after the appliance is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.
PLEASE NOTE: Logs have been designed to work
specifically with the burner of this appliance. Exact
placement will ensure proper operation of your gas
appliance and reduce sooting.
Place Log #3 over Locating Pins
Locating Pins
Figure 8.11 Position rear log (#3) over the two locating pins.
Depression for Log #2
Figure 8.12 Shows the depression locations for Logs #1
and #2.
Place upright
in depression
Figure 8.13 Place right front log (#1) into the depression. The
log sits upright and does not lean against log #3.
Depression for Log #1
1
Quadra-Fire • Sapphire • 7055-116 Rev. G • 10/12
2
Figure 8.14
Place left front log (#2) into the depression. The
log sits upright and does not lean against log #3.
H. Mineral Wool
WARNING
Explosion Risk.
• Follow ember placement instructions in
manual.
• Do NOT place embers directly over
burner ports.
• Replace ember material annually.
Improperly placed embers interferes with proper burner
operation.
Figure 8.15 Apply dime size pieces sparingly along front
edge of burner. Do not block gas ports.
3
1
31